|
STANAG 5066 (Profile for High Frequency (HF) Radio Data Communication) is a NATO Standardization Agreement specification to enable applications to communicate efficiently over HF radio. STANAG 5066 provides peer protocols that operate above an HF modem and below the application level. STANAG 5066 includes the mandatory SIS (Subnet Interface Sublayer, sometimes called ''Subnet Interface Service'') protocol that enables an application to connect to an HF modem through a STANAG 5066 server over TCP/IP. This enables a clean separation between application and modem. The standard also defines two more layers, CAS which is intended of stablish connections to other HF nodes, and DTS, which controls all the data manipulation for transmission (slicing, directioning, timing...) and the reconstruction in reception. There are two basics mode of transmission defined by this standard. ARQ and NON-ARQ. # ARQ uses package confirmation (through ACK response packages), and ''sliding window'' technique, which size is 128 elements. The "sending-services" can also have delivery confirmation of every package they sends. It is necessarily point-to-point protocol. It can be equivalent to TCP. # NON-ARQ is a transmission mode in which receiver node don't confirm the well-reception of the received packages. Receiver try to compose corrupted parts from future receptions, if it is impossible, the STANAG 5066 defines that the package has to be dispatched, and mark it with the known errored parts. This transmission mode allows to use point-to-point, point-to-group and broadcast. It can be compared to UDP into the IP philosophy. STANAG 5066 defines a SIS-to-SIS package size of 2048 bytes maximum, when using point-to-point transmitting mode (ARQ or NON-ARQ), and 4096 bytes when using broadcast (NON-ARQ only). ==See also== * STANAG 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「STANAG 5066」の詳細全文を読む スポンサード リンク
|